Meticulously designed, an outcome of sophisticated fan technology is what your Orient Exhaust Fan is all about. Flawless performance of this transair exhaust fan brings in comfort of fresh air by driving out stale air, round-the-clock.

Applications are mentioned below:

- Industrial kitchens & Restaurants
- Paint Booths
- Room Coolers
- Laboratories & Workshops

1. Fix 4 nos. stays with rubber pad & fixing bracket to the frame with hex nut bolt & washers.

2. Unscrew hex bolt from motor shaft & fix other end of stay to the motor with hex bolt & washers.

3. Mount blade assy on motor shaft locating dimple hole and tighten firmly by fixing screws. Insert split pin into the shaft hole at the end and spread free ends.

4. Connect motor lead to the power-supply, Motor leads are connected at factory for functioning as exhaust.

5. For Blow-in-fresh air change connections as per the diagram affixed inside the back cover. Reverse the blade assy position on shaft and clamp in the suitable dimple hole. Put split pin properly.

1. Diameter of hole on wall or duct should be 25mm more than the specified sweep for free rotation of Blade assy.

2. Check for any resistance in the path of airflow.

3. Motor must be fixed with its axis horizontal.

Fan motor contains 2 nos. properly greased ball bearings and do not need lubrication for at least two years. For overhauling remove old grease completely land change with IOC servogem-3 or equivalent grease.